Introduction
Liquid oxygen (LOX) and liquid nitrogen (LIN) are sold in litres, kilograms, tonnes or cubic metres, depending on the supplier. Your process, your flow meters and every on-site gas generator are rated in Nm³ (normal cubic metres of gas). Unless you convert everything to the same unit, you cannot tell what you are really paying, or compare it with any alternative.
This guide gives you the conversion factors for liquid oxygen and liquid nitrogen, shows how to work out the true cost per Nm³ including tank rental, and compares it with producing the same gas on site with a PSA generator.
What Is an Nm³?
One Nm³ (normal cubic metre) is the amount of gas that fills one cubic metre at 0 °C and 1.013 bar (atmospheric pressure). Gas expands enormously when liquid turns to gas, so a small volume of liquid becomes a large volume of gas.
You will also see Sm³ (standard cubic metre), which uses 15 °C instead of 0 °C. Because warmer gas takes up more space, 1 Sm³ contains a little less gas than 1 Nm³: 1 Sm³ ≈ 0.948 Nm³. If your invoice says Sm³, convert it before comparing prices.
Conversion Factors: Liquid to Gas
| Product | 1 litre of liquid | 1 kg of liquid | Liquid density |
|---|---|---|---|
| Liquid nitrogen (LIN) | ≈ 0.646 Nm³ of gas | ≈ 0.800 Nm³ of gas | ≈ 0.808 kg per litre |
| Liquid oxygen (LOX) | ≈ 0.799 Nm³ of gas | ≈ 0.700 Nm³ of gas | ≈ 1.141 kg per litre |
Table 1: Liquid-to-gas conversion factors for liquid nitrogen and liquid oxygen (gas at 0 °C, 1.013 bar)
Turned around, 1 Nm³ of nitrogen gas comes from about 1.55 litres (1.25 kg) of liquid nitrogen, and 1 Nm³ of oxygen gas comes from about 1.25 litres (1.43 kg) of liquid oxygen.
Why litres and kg give different answers: liquid oxygen is heavier than water (about 1.14 kg per litre), while liquid nitrogen is lighter (about 0.81 kg per litre). So a litre of LOX makes more gas than a kg of LOX, but a litre of LIN makes less gas than a kg of LIN. Always check which unit your invoice uses.
Quick conversion examples
- 1,000 litres of liquid nitrogen ≈ 646 Nm³ of nitrogen gas
- 1,000 kg of liquid nitrogen ≈ 800 Nm³ of nitrogen gas
- 1,000 litres of liquid oxygen ≈ 799 Nm³ of oxygen gas
- 1,000 kg of liquid oxygen ≈ 700 Nm³ of oxygen gas
What Liquid Gas Costs per Nm³
Delivered prices vary with distance from the air separation plant that makes the liquid, contract volume and season. Typical ranges in India are (1)(2):
| Product | Per Nm³ of gas | Equivalent per litre of liquid | Equivalent per kg of liquid |
|---|---|---|---|
| Liquid nitrogen | ₹13 – ₹25 | ₹8.4 – ₹16.2 | ₹10.4 – ₹20.0 |
| Liquid oxygen | ₹15 – ₹25 | ₹12.0 – ₹20.0 | ₹10.5 – ₹17.5 |
Table 2: Typical liquid nitrogen and liquid oxygen prices in India, converted to the same units
Use Table 2 to check your own invoice: if you pay per litre or per kg, multiply by the factor in Table 1 to get your price per Nm³ of usable gas, then compare it with the alternatives below.
The True Cost: More Than the Price per Litre
The invoice price is only part of the cost of liquid gas. The true cost per Nm³ also includes:
- Tank and vaporiser rental: a fixed monthly charge, whether you use a lot of gas or a little.
- Boil-off losses: liquid gas slowly warms and evaporates in storage. If your usage is low compared with the tank size, a share of what you pay for is vented before you use it.
- Delivery dependence: price rises, delayed tankers and minimum-order terms are outside your control.
- Purity you may not need: liquid nitrogen typically comes at 99.999% or higher, even if your process only needs 99% or 99.9% (1).
Worked example: liquid nitrogen in litres
We ran a typical case through the Absstem PSA vs Liquid calculator: a plant using 3,000 litres of liquid nitrogen a day, paying ₹18 per Nm³, with a tank rental of ₹50,000 a month. The calculator converts the litres to gas for you: 3,000 litres becomes 1,938 Nm³ a day.

Figure 1: PSA vs Liquid calculator with daily use entered in litres: 3,000 litres of liquid nitrogen = 1,938 Nm³ a day

| Item | Value |
|---|---|
| Daily use | 3,000 litres = 1,938 Nm³ |
| Monthly use (30 days) | 58,140 Nm³ |
| Gas cost at ₹18 per Nm³ | ₹10,46,520 |
| Tank rental | ₹50,000 |
| Total per month | ₹10,96,520 |
| True cost per Nm³ including rental | ₹18.86 |
Table 3: True monthly cost of liquid nitrogen in the worked example (Absstem ROI calculator)
The rental alone adds ₹0.86 to every Nm³ in this example, and more if usage drops. Boil-off losses, which depend on your tank and usage pattern, would add more.
How PSA On-Site Generation Compares
A PSA generator makes the same gas on site from air, and the main running cost is electricity. At ₹8 per kWh (1)(2):
| Gas | Liquid supply (₹/Nm³) | PSA on site (₹/Nm³) | Notes |
|---|---|---|---|
| Nitrogen | ₹13 – ₹25 + rental | ₹1.76 – ₹10.56 | Depends on purity: 95% costs ₹1.76, 99.9% costs ₹2.64, 99.99% costs ₹4.80, 99.999% costs ₹8.48 |
| Oxygen | ₹15 – ₹25 + rental | ₹8.80 | About 1.1 kWh per Nm³ at ₹8 per kWh |
Table 4: Cost per Nm³ – liquid supply vs PSA on-site generation (₹8 per kWh)
In the liquid nitrogen example above, if the process needs 99.99% purity, the same 58,140 Nm³ a month from a PSA generator would cost about ₹2.8 lakh in electricity at ₹4.80 per Nm³, against ₹10.97 lakh for liquid supply. For oxygen, a plant using 100 Nm³/hr pays about ₹14.9 lakh a month for liquid oxygen at ₹20 per Nm³ (with ₹50,000 rental), against about ₹6.3 lakh for PSA oxygen (3).
When Liquid Gas Still Makes Sense
- Very small or occasional use, where a PSA generator would sit idle
- Processes that need the gas as a liquid (cryogenic freezing, cooling)
- Short-term projects, or as a backup supply during plant maintenance
For continuous gas demand, on-site generation usually costs a fraction of liquid supply. Many plants keep a small liquid tank as backup and run a PSA generator for day-to-day demand.
Internal Resources – Next Steps
- Free ROI Calculator, including PSA vs Liquid – enter your use in litres, kg, Sm³ or Nm³
- nGEN – PSA Industrial Nitrogen Generator
- Idos – PSA Industrial Oxygen Generator
- Nitrogen Purity Grades Explained: N2.0 to N6.0
Consult Us
For PSA oxygen and nitrogen generators sized to your plant, contact us:
- Email: info@absstem.com
- Phone: 1800 547 0506 (toll-free)
- Website: absstem.com
References
- Absstem Technologies. (2025). Comparison of the Cost of Nitrogen Gas from Different Sources.
- Absstem Technologies. (2025). Comparison of the Cost of Oxygen Gas from Different Sources.
- Absstem Technologies. (2026). PSA vs Liquid ROI Calculator.
- Liquid and gas densities: standard physical property values for oxygen and nitrogen (liquid at normal boiling point; gas at 0 °C, 1.013 bar).
